10.24kWh 48V ECCO Lithium Battery 200AH (Wall Mount 48200)

Ecco 48V 10kwh Lithium Battery LFELI-48200

Product Features:

Flame retardant system to UL94V-0.
Good high temperature performance
Safe Lithium Iron Phosphate Technology
Thousands of cycles, under normal conditions
High energy density and conversion efficiency
Environmental Friendly, without any heavy metals
Complete with Battery Management System built-in
Can use most standard VRLA chargers for this system
Low self discharge rate of 2 years before required recharging
Easy installation, can be in 19-inch standard cabinet or be wall-mounted
Built-in automatic protection for over-charge, over-discharge & over-temperature conditions

Characteristics

Items
Certification（Program） CE UN38.3 IEC
u High energy density and conversion efficiency
u Intelligent software anti-theft design
u Compatible with many inverters
u Easy maintenance with SOC (charge status) and SOH (health status)detection

Specifications: 

Nominal voltage 51.2V ( 43.2V-57.6V) [16Cells]
Nominal capacity 200Ah
Maximum continuous charge/ discharge current 150A/150A @ 25ºC
Recommended charge setting  In the constant current stage, the charging voltage is cut off to 56.4V;
Float charge constant voltage stage, the voltage is set to 54.5V;
Cut-off voltage 56.4V, plus or minus 0.5V
Weight 83kg
Dimensions (W ×D ×H)（inch） 442*550*244mm（17.40*21.65*9.61）
Cycle life 5000 Cycles @ 25ºC 0.5C,80% DOD；3500 Cycles @ 25ºC 0.5C,100%DOD
Number of parallel connections supported 16
Self-discharge (month)@25ºC ≤3%
BMS communication types RS485; RS232; CAN
Cooling Mode Free cooling
IP Class IP30
Display Fuction LCD diplay screen，support English
Design Life 15 years

5 Years Warranty

Warranties:
All inverters and batteries must be installed by a qualified electrical wireman or Master electrician with a valid registration with the Department of Labour. A valid electrical certificate of compliance (COC) must be issued once installed, specific to the installation of the backup or solar system. The installation must be compliant with SANS 10142 and ALL its parts. Any warranty claim submitted without installation photos, a valid COC and proof of a qualified wireman/master electrician installing the unit, can be rejected and will render the warranty claim null at void.