3.5KVA / 3500W 24V ECCO Hybrid Inverter 60A Plug & Play System + 2.56kWh LITHIUM BATTERY (SOLAR READY)
OUR LOAD SHEDDING SOLUTION !
The all-in-one portable back-up inverter battery system .
What is an all-in-one portable inverter system and what does it do?
It is an inverter unit connected to a battery that provides power when there is load shedding. It will charge your battery once the power is on. As soon as load shedding hits, your inverter system instantly transfers over to battery power. This will allow you to keep your lights, TV, computers, chargers, and wifi running during load shedding. Solar ready : Add a solar panel and charge your batteries when there is no power.
How much battery backup power will I have when the power is off?
If you connect 150w which is usually a TV, Wifi, Lights, etc. This portable system will last +- 30-34 Hours.
Introducing the 3.5kVA Plug and Play Power System, a versatile and portable solution designed to meet the diverse energy needs of modern households. Available in both Deep Cycle Gel and Lithium battery configurations, this system ensures reliability and convenience for powering small appliances in any residential setting.
For those seeking extended power autonomy, the Lithium battery option is the preferred choice. With its advanced energy density and efficiency, the Lithium variant can power appliances for up to 30 hours on a single charge (depending on load). This makes it suitable for longer outages or situations where uninterrupted power supply is critical.
The main difference between PWM and MPPT charge control devices is that the MPPT devices are more efficient. MPPT charge control devices have 30 % more efficient in charge efficiency according to PWM type. Panel voltage and battery voltage should be matched in PWM systems.
Hybrid Inverter 24v 3.5 Kva 3500w Mppt 60A Inverter Pure Sine Wave – Ecco
Features:
Pure sine wave
Power factor 1.0
PV input Voltage 30Vdc~160Vdc
Built-in MPPT 60A
Detachable dust cover for harsh environment
WiFi remote monitoring optional
Support multiple output priority: UTL, SOL, SBU,
RS485 BMS Communication
Lithium battey activation
This system is equipped with the following:
1x PORTABLE STEEL BOX WITH 2x LOCK WHEELS
1x SURGE PLUG ON 1m POWER CABLE (2.5mm cabtyre)
1x DOUBLE SIDED FEMALE PLUG SOCKET
1x FUSE + DISCONNECTOR (battery to inverter)
1x BATTERIES AND INVERTER MENTIONED IN THE TITLE
SIZE
60 cm x 60 cm x 45 cm
Ritar 25.6v 100ah Lithium LifePO4 2.56Kwh
SAFETY
+ Prismatic LFePO4 cells, Longer cycle life and much more safety.
+ Low voltage system, safety for application.
+ IEC62619, UI1973 certification for cell.
UN38.3, MSDS certification for system.
DESIGN
Standard 19″ rack design, support rack or wall mounted.
Flexible and easily installation.
+ -20~+55°C widely temperature range.
+ Maintenance free.
BATTERY MANAGEMENT SYSTEM (BMS)
+ Independent protection for charge and discharge.
+ Over charge protection, over discharge protection and over temperature, short circuit protection.
| Nominal voltage [V] | 25.6 |
| Nominal capacity [Ah] | 100 |
| Total energy [kWh] | 2.56 |
| Max. charging current [A] | 100 |
| Max. charging Voltage [V] | 29.2 |
| Charging voltage [V] | 27.6-28.8 |
| Max. discharging current [A] | 100 |
| End of discharge voltage [V] Product dimension [W*D*H] | 442*300*110 |
| Product weight [kg] | 23 |
| Protection class | IP20 |
| Operating humidity | 0-95% RH (No condensing) |
| Operating temperature range Communication interface | Standard Product: Charge: 0 ~ +55°C; Discharge: -20 ~ +55°C |
| Cycle Life | 6000 |
| Protection | OVP, LVP, OCP, OTP, LTP protection. |
| Certification | UN38.3, MSDS, CE |
| Series Support | No support |
| Parallel Support | Yes, Max 15pcs |
PRODUCT WARRANTY
Ritar warranties that the Product retains either eighty percent (80%) of Usable
Energy for Five (5) years from the shipment date, or the Cycle Life ≥3000,
whichever comes first.
Warranties:
All inverters and batteries must be installed by a qualified electrical wireman or Master electrician with a valid registration with the Department of Labour. A valid electrical certificate of compliance (COC) must be issued once installed, specific to the installation of the backup or solar system. The installation must be compliant with SANS 10142 and ALL its parts. Any warranty claim submitted without installation photos, a valid COC and proof of a qualified wireman/master electrician installing the unit, can be rejected and will render the warranty claim null at void.
